Emtek 5110STUUS26LH Stuttgart Lever Passage Polished Chrome

Product Description

The EMTEK 5110STUUS26LH is a Stuttgart-style lever passage set in a Polished Chrome finish, designed for interior door applications where latching without locking is required. This left-hand configuration features a square rose mounting plate and is built to fit doors ranging from 1-1/4 inches to 2 inches in thickness. The 2-3/8 inch backset suits standard pre-bored interior door preparations. Licensed contractors, finish carpenters, and experienced DIYers install this type of hardware during new construction or renovation work. The lever and rose are assembled as a passage set, meaning no key or turn button is included.

This passage lever set is suited for interior rooms such as hallways, closets, and common areas where privacy hardware is not required. The Stuttgart lever design pairs with the included square rose for a clean, architectural look. The left-hand designation applies to doors where the hinge is on the right when facing the exterior side of the door. A 2-3/8 inch backset is the standard measurement for most interior pre-hung doors in residential construction, making this set a direct fit in the majority of typical applications.

Key Features

• Left-hand passage configuration — no locking function, suitable for hallways and closets
• 2-3/8 inch backset fits standard residential interior door prep
• Square rose plate provides a clean, architectural mounting profile
• Polished Chrome finish for high-reflectivity, contemporary appearance
• Fits door thickness range of 1-1/4 inches to 2 inches
• Sold as an individual unit (EA); case quantity of 12 available for project orders

Compatibility

Designed as an OEM-style passage lever set compatible with standard residential interior doors pre-bored for a 2-3/8 inch backset and a thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or skilled tradesperson during trim-out phase of construction or renovation. Confirm door hand orientation before installation, as this is a left-hand specific unit and cannot be reversed. Ensure the door bore diameter and backset measurement match the hardware before beginning installation. Disengage any latch mechanism and remove the existing hardware completely before fitting the new lever set.