Emtek 5110STUUS19RH Stuttgart Lever Passage Set Flat Black

Product Description

The EMTEK 5110STUUS19RH is a Stuttgart-style lever passage set designed for interior doors that do not require locking hardware. Configured for right-hand operation with a 2-3/8 inches backset, this passage set pairs the Stuttgart lever with a square rose trim and ships in a Flat Black finish. It suits residential interior doors ranging from 1-1/4 inches to 2 inches in thickness. Licensed locksmiths, finish carpenters, and general contractors install this type of hardware during new construction, remodel, and door replacement work. The square rose trim gives the installation a clean, geometric profile consistent with contemporary and transitional interior design schemes.

This passage set is appropriate for interior residential applications where a latching function is needed without a keyed or privacy lock, such as hallways, closets, and common living spaces. The right-hand configuration designates the hinge placement and swing direction, which must be confirmed before installation. The 2-3/8 inches backset is the standard measurement for most residential pre-hung interior doors. Door thickness compatibility spans 1-1/4 inches to 2 inches, covering the majority of hollow-core and solid-core interior door slabs commonly found in residential settings.

Key Features

• Stuttgart lever design with square rose trim for a clean, geometric profile
• Passage function — latching without lock cylinder, suited for hallways and closets
• Right-hand configuration for correct hinge-side and swing alignment
• 2-3/8 inches backset compatible with standard residential interior door prep
• Fits door thickness range of 1-1/4 inches to 2 inches
• Flat Black finish for consistent appearance in contemporary and transitional interiors

Compatibility

Designed as an OEM-style replacement or new-installation passage set for standard residential interior doors with a 2-3/8 inches backset and a thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or licensed locksmith. Before installation, confirm door hand orientation and backset measurement against the existing door prep. A standard door latch bore and cross-bore are required; follow ANSI/BHMA guidelines for bore sizing and spacing. Do not force the lever onto the spindle or over-tighten rose mounting screws, as this can damage the finish or internal latch mechanism.