Emtek 5110STUUS15RH Stuttgart Lever Passage Set Satin Nickel

Product Description

The EMTEK 5110STUUS15RH is a Stuttgart-style lever passage set finished in Satin Nickel, designed for interior doors that do not require locking function. The set includes a lever handle mounted on a square rose and is configured for right-hand door swing with a 2-3/8 inches backset. It fits doors ranging from 1-1/4 inches to 2 inches in thickness. Licensed locksmiths, finish carpenters, and general contractors typically install this hardware during new construction or renovation work. The Satin Nickel finish delivers a brushed, low-sheen appearance suited to contemporary and transitional interior design schemes.

This passage set is intended for interior doors such as hallway entries, closets, and living spaces where a latch mechanism is needed but a keyed or privacy lock is not required. The right-hand configuration applies to doors where the hinges are on the left as viewed from the exterior or key side. The 2-3/8 inches backset is the standard measurement for most residential interior doors. The square rose base plate provides a clean, geometric frame around the lever and mounts flush to the door face.

Key Features

• Stuttgart lever design on a square rose base plate
• Passage function — latch only, no locking mechanism
• Right-hand door swing orientation
• 2-3/8 inches backset for standard residential interior doors
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Satin Nickel finish with brushed, low-sheen appearance

Compatibility

Designed as an OEM-style passage set replacement or new-install hardware for standard residential interior doors with a 2-3/8 inches backset and door thickness between 1-1/4 inches and 2 inches, right-hand swing configuration.

Installation Notes

Installation is typically performed by a finish carpenter, general contractor, or experienced DIYer using a drill, hole saw, and chisel for mortising the latch plate. Confirm door hand orientation before ordering, as right-hand and left-hand sets are not interchangeable. Ensure the door bore hole diameter and backset measurement match the hardware specifications prior to installation. Follow all applicable local building codes for interior door hardware.