Emtek 5110ROUUS10B Round Knob Passage Set Oil Rubbed Bronze

Product Description

The EMTEK 5110ROUUS10B is a passage knob set designed for interior doors that do not require locking. It pairs a round knob with a square rose in an Oil Rubbed Bronze finish, providing a clean, traditional look suited to residential and light commercial applications. The set is configured for a 2-3/8 inch backset and fits doors ranging from 1-1/4 inches to 2 inches thick. Passage sets like this are commonly installed by finish carpenters, general contractors, and experienced DIYers during new construction or remodel work. The unit ships as a single assembly ready for standard cylindrical door prep.

This passage set is appropriate for interior non-locking applications such as hallways, closets, and common living spaces. It is not intended for entry doors or any door requiring a keyed or privacy function. The 2-3/8 inch backset is the standard measurement for most residential interior door preparations. The Oil Rubbed Bronze finish suits transitional, traditional, and rustic interior design schemes. The square rose provides a defined, geometric frame at the door face that contrasts with the round knob profile.

Key Features

• Passage function — no locking mechanism, suited for interior hallway and closet doors
• Round knob paired with a square rose for a classic contrast in profile
• 2-3/8 inch backset fits standard residential interior door prep
• Compatible with doors 1-1/4 inches to 2 inches thick
• Oil Rubbed Bronze finish for a dark, traditional appearance
• Sold as a single assembly (EA); case quantity of 12 available for bulk orders

Compatibility

Designed as a passage-function replacement or new-installation knob set for interior doors with a standard cylindrical bore, a 2-3/8 inch backset, and a thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or general contractor using standard door hardware tools including a screwdriver and a door latch bore kit if the door is not pre-bored. Confirm the door backset measurement before installation — do not force the latch into a mismatched bore. Because this is a passage set, no keying or cylinder work is required. Follow local building codes for interior door hardware requirements on commercial projects.