Emtek 5110HLOUS4RH Helios Lever Passage Set Satin Brass

Product Description

The EMTEK 5110HLOUS4RH is a right-hand Helios lever passage set finished in Satin Brass, designed for interior doors that do not require locking. The passage function allows free passage through the door without a turn button or keyed cylinder. The set includes a 2-3/8 inch backset and a square rose, and is engineered to fit doors ranging from 1-1/4 inches to 2 inches thick. Intended for residential and light commercial interior applications, this hardware is typically installed by finish carpenters, general contractors, or experienced owner-builders during new construction or renovation work.

This passage set is suited for interior rooms such as hallways, closets, and living areas where privacy locksets are not required. The square rose provides a clean, architectural look that pairs with transitional and modern interior design themes. The Satin Brass finish offers a warm, low-sheen tone appropriate for a range of interior decors. The 2-3/8 inch backset is the standard measurement for most residential interior door prep, making this set compatible with typical door bore configurations.

Key Features

• Passage function — no locking mechanism, free turn from both sides
• Right-hand orientation for correct lever return angle on right-hand doors
• 2-3/8 inch backset fits standard residential interior door prep
• Square rose design suits transitional and contemporary interiors
• Fits door thickness from 1-1/4 inches to 2 inches
• Satin Brass finish provides a warm, low-sheen appearance

Compatibility

Designed for standard residential interior doors with a 2-3/8 inch backset and door thickness between 1-1/4 inches and 2 inches. Intended for right-hand door swing applications with a square rose mounting configuration.

Installation Notes

Installation is typically performed by a finish carpenter or experienced installer using standard door hardware tools including a hole saw, chisel, and screwdriver. Confirm door hand orientation and backset measurement before installation. No electrical disconnection is required, but ensure the door is stable and properly hung before fitting the latch and lever assembly. Follow the manufacturer's installation template for accurate bore and latch pocket placement.