Emtek 5110HLOUS14LH Helios Lever Passage Set Polished Nickel

Product Description

The EMTEK 5110HLOUS14LH is a left-hand Helios lever passage set finished in Polished Nickel Lifetime. Designed for interior passage doors, this set includes the Helios lever paired with a square rose and a 2-3/8 inches backset. The passage function means there is no locking mechanism — the lever operates freely from both sides, making it appropriate for hallways, closets, and common interior spaces. It fits doors ranging from 1-1/4 inches to 2 inches in thickness. Custom assembled in Southern California, each unit ships as a single assembly ready for installation by a finish carpenter or experienced installer.

This passage set is suited for residential interior door applications where a non-locking through-passage function is required. The square rose provides a clean, angular trim profile that pairs well with transitional and contemporary interior design schemes. The Polished Nickel Lifetime finish resists tarnishing under normal interior conditions. Door thickness compatibility ranges from 1-1/4 inches to 2 inches, covering the majority of standard interior door stock. The 2-3/8 inches backset matches the most common interior door prep found in residential construction.

Key Features

• Left-hand orientation for doors hinged on the left side when viewed from the pull side
• Passage function — no lock, lever turns freely from both sides
• 2-3/8 inches backset fits standard residential interior door prep
• Compatible with door thickness from 1-1/4 inches to 2 inches
• Square rose trim for a clean, geometric profile
• Polished Nickel Lifetime finish for long-term interior durability

Compatibility

Designed as an OEM-style passage set for standard residential interior doors with a 2-3/8 inches backset prep and door thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or skilled installer. Verify door hand orientation before ordering — left-hand units are not field-convertible to right-hand. Confirm existing bore diameter and backset measurement match the hardware spec before beginning installation. Do not over-tighten mounting screws, as this can bind the lever mechanism or damage the rose trim.