Emtek 5109STUUS26RH Stuttgart Lever Passage Set Polished Chrome

Product Description

The EMTEK 5109STUUS26RH is a right-hand Stuttgart lever passage set finished in Polished Chrome. It is designed for interior doors where latching without locking is required — hallways, closets, and similar non-secure passages. The set includes a Stuttgart-style lever mounted on a Disk Rose and is configured for a 2-3/8 inch backset. Door thickness compatibility spans 1-1/4 inches to 2 inches, covering most standard residential interior door stock. Licensed locksmiths, carpenters, and finish contractors are the typical installers. The Polished Chrome finish provides a bright, reflective surface suited to contemporary and transitional interior design schemes.

This passage set is appropriate for residential interior door applications where no locking function is needed. The Stuttgart lever profile pairs with the low-profile Disk Rose for a clean, minimalist appearance. The right-hand designation applies to the lever orientation and should be confirmed against the door handing before ordering. The 2-3/8 inch backset is the standard dimension for most pre-bored interior doors. The unit ships as a single assembly configured for immediate installation on compatible door preparations.

Key Features

• Passage function — latches without locking, suited for hallways and closets
• Stuttgart lever style paired with Disk Rose for a streamlined profile
• Right-hand configuration with 2-3/8 inch backset
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Polished Chrome finish for a bright, durable surface appearance

Compatibility

Designed as a passage set replacement or new installation for interior doors with a standard 2-1/8 inch bore and 2-3/8 inch backset, accommodating door thicknesses from 1-1/4 inches to 2 inches.

Installation Notes

Installation is performed by carpenters, finish contractors, or licensed locksmiths. Confirm door handing before installation — right-hand and left-hand sets are not interchangeable. Ensure the door is pre-bored to the correct diameter and that the backset measurement is verified before mounting the latch plate. No special tools beyond a standard screwdriver set are typically required for a pre-bored door.