Emtek 5109STUUS15LH Stuttgart Lever Passage Set Satin Nickel

Product Description

The EMTEK 5109STUUS15LH is a left-hand Stuttgart lever passage set finished in Satin Nickel, designed for interior doors that do not require locking. The set includes the Stuttgart-style lever mounted on a Disk Rose and ships with a 2-3/8 inch backset. It fits doors ranging from 1-1/4 inches to 2 inches in thickness. A passage set like this installs on non-locking interior doors such as hallways, closets, and living areas. Licensed contractors and finish carpenters typically handle the installation as part of a door hardware package on new construction or remodel projects.

This lever set is suited for residential interior door applications where a clean, contemporary lever profile is specified. The Disk Rose provides a low-profile mounting base that works with standard door prep. The Satin Nickel finish coordinates with a wide range of interior hardware and fixture finishes. Custom assembly is performed at the manufacturer's facility, and the unit ships as a single set ready for installation on a left-hand door configuration.

Key Features

• Stuttgart lever design on a Disk Rose base for a low-profile, contemporary look
• Left-hand configuration for correct lever orientation on left-hand doors
• 2-3/8 inch backset accommodates standard interior door prep
• Fits door thickness from 1-1/4 inches to 2 inches
• Satin Nickel (US15) finish for a brushed, corrosion-resistant surface
• Passage function — no locking mechanism, suited for hallways and closets

Compatibility

Designed as a passage-function lever set for standard residential interior doors with a 2-3/8 inch backset and a thickness range of 1-1/4 inches to 2 inches, left-hand swing configuration.

Installation Notes

Installation is typically performed by a finish carpenter or licensed contractor during door hardware rough-in or finish stages. Confirm door hand orientation before installation — installing a left-hand lever on a right-hand door will result in incorrect lever return angle. Ensure the door latch bore and cross bore match the backset and chassis dimensions before mounting. No locking cylinder is included; this is a passage-only set.