Emtek 5050HLOUS26 Helios Lever Dummy Pair Polished Chrome

Product Description

The EMTEK 5050HLOUS26 is a Helios lever dummy pair with a square rose, designed for non-latching door applications where passage hardware is needed without an active latch mechanism. Finished in polished chrome, this dummy pair is suited for doors ranging from 1-1/4 inches to 2 inches in thickness. The unit ships as a pair, allowing coordinated installation on both faces of a door. It is typically installed by carpenters, finish trim contractors, or experienced DIYers working on interior doors, closets, or decorative double doors that require pull-only function with a clean, architectural appearance.

This dummy lever pair is intended for interior applications where a door does not require a latch or lock, such as bypass closet doors, double doors with a fixed inactive leaf, or decorative pass-through openings. The square rose provides a geometric, contemporary backplate profile. The polished chrome finish coordinates with standard chrome plumbing fixtures and other hardware in residential and light commercial interiors. No compatible model numbers or specific door hardware systems were listed in the product data, so verify fitment against your door prep and rose mounting pattern before ordering.

Key Features

• Dummy pair configuration — no latch or chassis required, mounts directly to door face
• Helios lever style with square rose backplate for a clean geometric profile
• Polished chrome finish for broad interior hardware coordination
• Fits door thickness from 1-1/4 inches to 2 inches
• Sold as a pair (two levers) for two-sided installation
• Package dimensions: 7 inches long by 6 inches wide by 4.5 inches tall

Compatibility

Designed as a face-mount dummy lever pair for interior doors with a thickness between 1-1/4 inches and 2 inches. No specific door brand or model compatibility data was provided in the product listing. Confirm rose mounting hole pattern and door prep dimensions before installation.

Installation Notes

Dummy levers mount directly to the door face without a latch bore or chassis — verify the door surface is clean and flat before fastening. A licensed carpenter or skilled finish installer typically handles door hardware of this type. No lockset prep is required, but confirm the rose screw spacing matches any existing bore pattern on the door. Follow the manufacturer-included template and fastener instructions; do not overtighten mounting screws, as this can crack the rose or strip the door face.