Empire Industries E105.48 Digital Level 48 Inches

Product Description

The EMPIRE INDUSTRIES E105.48 is a 48-inch True Blue digital level designed for inspector-grade accuracy on the job site. It features auto-calibration, meaning the unit delivers accurate digital readouts immediately upon power-on without a manual setup step. The level carries an IP65 rating for dust and water resistance, making it suitable for demanding field conditions. It includes dual backlit digital displays and a top-read display on the working surface for overhead applications. A licensed contractor or inspector working in HVAC, plumbing, electrical, or general construction will find the seven measuring modes and inspect function directly applicable to grade verification and ADA ramp work.

The E105.48 fits residential and commercial installation scenarios where precise slope, plumb, and level readings are required. The inspect mode is specifically useful for verifying grade measurements on repeated passes, such as ADA-compliant ramp installations or drain slope verification. Audio indicators provide hands-free feedback, emitting a continuous tone at level and progressive beeps as the tool approaches level or plumb. A protective storage case is included with this 48-inch model per manufacturer standard for all levels 24 inches and longer.

Key Features

• Auto-calibrated on power-on — no manual setup required before measuring
• IP65 rated for dust and water protection in field conditions
• Seven measuring modes: degree (rough-in, one decimal, two decimal), in/ft (decimal fractional), mm/m, and percent
• Inspect mode for repeat grade verification, including ADA ramp applications
• Dual backlit digital display with top-read surface and auto-inverting overhead display
• Audio indicator with continuous tone at level and progressive beeps approaching level or plumb
• Power save mode with selectable timeout at 15, 30, 60, or 120 minutes
• Precision milled edges rated to 0.0005 inches per inch accuracy

Compatibility

Designed as a direct-use digital level for trade professionals requiring inspector-grade accuracy in construction, mechanical, and inspection applications.

Installation Notes

No power source beyond the unit's own battery is required. Power down or remove batteries before storing to preserve battery life using the built-in power save mode. Hold mode should be used to lock a reading before repositioning on surfaces where vibration or movement could affect the display. Verify calibration status on each power cycle in accordance with the job site quality control procedure.

Technical Specifications

• Length: 48.75 inches
• Width: 3 inches
• Height: 3 inches
• Weight: 4.67 pounds
• Accuracy: 0.0005 inches per inch
• IP Rating: IP65
• Measuring Modes: 7
• UPC: 0045242482924

Standard Information

• Brand: EMPIRE INDUSTRIES
• Manufacturer Part Number: E105.48