Emberglow EWVFS32 Vent Free Gas Stove 32000 Btu/h

Product Description

The EMBERGLOW EWVFS32 is a vent-free gas stove designed to deliver up to 32,000 BTU/h of radiant heat without requiring a flue or chimney connection. Operating on a millivolt burner system, it needs no dedicated electrical supply for basic operation, making it suitable for installation on interior walls. The unit ships with a five-piece ceramic fiber log set and glowing ember bed displayed behind a decorative arched safety screen. Cast iron styling and a matte black finish allow it to integrate into a range of residential room settings. A licensed gas technician or qualified installer should complete the gas connection and final commissioning.

The EWVFS32 is rated to condition spaces up to 1,500 square feet and is available in both Natural Gas (EWVFS32NV) and Liquid Propane (EWVFS32PV) configurations. Because it is vent-free, installation clearance requirements are minimal: 1 inch from the rear of the unit to the wall, 2 inches on each side, and a minimum of 18 inches from the top of the unit to any overhead mantel. An optional blower (B150, sold separately) mounts through the back of the heater and adds Auto, Off, and Manual fan control modes. Blower operation requires a power supply; however, the heater continues to produce heat during a power failure without the blower. The on/off millivolt control is also compatible with the Everwarm EW4001TH remote and any standard millivolt thermostat for automatic cycling.

Key Features

• 32,000 BTU/h maximum output heats up to 1,500 square feet
• Vent-free design delivers 99% thermal efficiency with no flue required
• On/Off millivolt burner operates without electricity under normal use
• Hi/Lo heat output selection on the unit; compatible with standard millivolt thermostats
• Five-piece ceramic fiber log set with glowing embers included
• Optional B150 blower (sold separately) with Auto/Off/Manual control
• Available in Natural Gas and Liquid Propane versions

Compatibility

Compatible with standard millivolt thermostats and the Everwarm EW4001TH remote control. Optional blower model B150 installs through the rear of the unit. Available in Natural Gas configuration (EWVFS32NV) and Liquid Propane configuration (EWVFS32PV). Note: vent-free products cannot be shipped to California, and state or local codes in some jurisdictions prohibit vent-free appliances. Verify local building codes before ordering or installing.

Installation Notes

Gas appliance installation must be performed by a licensed gas technician in accordance with applicable local codes and the appliance manufacturer instructions. Shut off the gas supply at the main valve before making or breaking any gas connections, and verify with a leak-detection solution after reconnecting. Minimum clearances must be observed: 1 inch rear, 2 inches each side, and 18 inches below any overhead mantel. If adding the optional blower, a properly grounded electrical circuit is required per NEC guidelines.

Technical Specifications

• Maximum BTU Output: 32,000 BTU/h
• Heating Area: Up to 1,500 sq ft
• Fuel Type: Natural Gas or Liquid Propane (choice at time of order)
• Venting Type: Vent Free
• Burner Control: On/Off Millivolt (Hi/Lo output selection)
• Electrical Requirement: None for standard operation; required for optional blower
• Width: 26 inches
• Depth: 16 inches
• Height: 29 inches
• Rear Clearance: 1 inch
• Side Clearance: 2 inches each side
• Top to Mantel Clearance: 18 inches minimum
• Finish: Matte Black
• Installation Type: Freestanding Stove

Standard Information

• Brand: EMBERGLOW
• Manufacturer Part Number: EWVFS32