Elkhart Products TEE-112X112X34 Copper Tee 1-1/2x1-1/2x3/4

Product Description

The ELKHART PRODUCTS TEE-112X112X34 is a reducing copper tee fitting sized at 1-1/2 inches x 1-1/2 inches x 3/4 inches. It is supplied cleaned and bagged, meeting the handling standards required for potable water and mechanical piping systems. The fitting accepts standard sweat solder connections on all three outlets. Licensed plumbers and pipefitters install this type of fitting when a branch takeoff is needed from a main run, stepping down from a 1-1/2-inch line to a 3/4-inch branch. The cleaned and bagged packaging keeps flux contamination and debris out of the fitting interior prior to installation, which is particularly important in potable water applications.

This tee is suited for residential and light commercial plumbing installations, including domestic water distribution, hydronic heating piping, and HVAC condensate or chilled water branch lines. It is appropriate anywhere a 3/4-inch branch must be taken off a 1-1/2-inch copper main. The WPT-24-24-16 designation referenced in the product data identifies the fitting by run and branch dimensions in sixteenths of an inch, consistent with standard copper pressure fitting classifications.

Key Features

• Reducing tee configuration: 1-1/2 inches run x 1-1/2 inches run x 3/4 inches branch
• Cleaned and bagged for potable water service and contamination-sensitive installations
• Sweat solder end connections on all three outlets
• Copper construction for corrosion resistance in water and hydronic systems
• WPT-24-24-16 dimensional classification for standard pressure fitting compatibility

Compatibility

Designed as an OEM-style replacement and new-installation copper pressure tee for residential and commercial plumbing and hydronic piping systems using 1-1/2-inch and 3/4-inch sweat copper pipe.

Installation Notes

Installation is performed by a licensed plumber or qualified pipefitter in accordance with applicable local plumbing codes and IAPMO or IPC standards. Shut off and drain the water supply before cutting into an existing line. All mating pipe ends must be cut square, deburred, and cleaned with emery cloth before applying flux and soldering. Do not use open flame near combustible materials during the soldering process; follow NFPA 51B guidelines for hot work in occupied structures.

Technical Specifications

• Run Size: 1-1/2 inches x 1-1/2 inches
• Branch Size: 3/4 inches
• Connection Type: Sweat solder (press-fit ends)
• Material: Copper
• Condition: Cleaned and bagged
• UPC: 1775420329184

Standard Information

• Brand: ELKHART PRODUCTS
• Manufacturer Part Number: TEE-112X112X34