Electro Hardware MP1005M19F16M4 Hex Standoff M4x0.7

Product Description

The ELECTRO HARDWARE MP1005M19F16M4 is a female hex circuit board standoff designed to provide precise spacing and secure fastening between PCBs and mounting surfaces in electronic assemblies. Manufactured from nylon with a plain, uncoated finish, this standoff accepts M4 x 0.7 metric threaded fasteners and offers a fully threaded 3 mm thread depth throughout its 3 mm overall length. The hexagonal body shape with a 6 mm width across flats allows for standard wrench or nut driver installation and removal. With a tensile strength of 16,500 psi, this nylon standoff delivers reliable mechanical performance in low-load electronic mounting applications where electrical isolation is required.

This standoff is used in printed circuit board assemblies across residential and commercial electronic equipment, control panels, HVAC control boards, and industrial electronics. It is suited for applications where a non-conductive spacer is needed to maintain board clearance, prevent short circuits, and absorb minor vibration. Technicians working in electronics manufacturing, field service, and panel fabrication will encounter this hardware when securing control boards within enclosures or stacking PCB layers at fixed standoff heights. The metric M4 x 0.7 thread size is common in modern control board designs.

Key Features

• Female hex body accepts M4 x 0.7 metric fasteners for secure PCB mounting
• Fully threaded with 3 mm thread depth through the full 3 mm overall length
• Nylon construction provides electrical isolation and corrosion resistance
• 6 mm hex width across flats allows standard tool engagement
• Plain, bright uncoated finish; no metallic coating to flake or conduct
• Meets MIL-P-17091B fastener standard for quality and dimensional consistency

Compatibility

Designed as a standard metric female hex standoff for PCB assemblies and electronic enclosures requiring M4 x 0.7 threaded hardware at a 3 mm standoff height.

Installation Notes

Installation is performed by electronics technicians or field service personnel working on control boards and panel assemblies. De-energize all equipment completely before installing or removing circuit board hardware. Use an appropriately sized nut driver or wrench sized for a 6 mm hex body; avoid over-torquing nylon standoffs as the material is subject to thread stripping under excessive load. Verify thread engagement is full and the mating fastener does not bottom out before the board is seated.