Electro Hardware MM1725M09MSC-1 Hex Standoff 10-32

Product Description

The ELECTRO HARDWARE MM1725M09MSC-1 is a male-male hex circuit board standoff machined from grade 18-8 303 stainless steel with a passivated finish. It accepts a 10-32 thread on both ends and measures 0.5 inches overall length with a hex body width across flats of 0.375 inches. The passivated surface provides corrosion resistance suitable for electronics enclosures, control panels, and PCB mounting applications. This standoff meets the QQ-S-763 federal specification for stainless steel fasteners. It is installed by electronics assemblers, electrical technicians, and field service engineers working on circuit board mounting and panel fabrication tasks.

This standoff is used wherever male-to-male threaded spacing is needed to mount a circuit board or PCB subassembly at a fixed offset from a panel, chassis, or second board. Typical applications include HVAC control board assemblies, electrical enclosures, and industrial panel builds requiring a stainless steel fastener with hex wrench engagement. The hex body profile allows torque application with a standard wrench or nut driver without slipping or marring the fastener.

Key Features

• Male-male thread configuration on both ends for direct board-to-panel or board-to-board standoff mounting
• 10-32 thread size on both ends
• 0.5 inch overall length with 0.375 inch width across flats for hex tool engagement
• Grade 18-8 303 stainless steel construction with passivated finish for corrosion resistance
• Meets QQ-S-763 federal fastener specification
• Hex body shape allows secure torque application with a standard wrench or nut driver

Compatibility

Designed as a direct-fit male-male hex standoff for circuit board and panel mounting applications requiring a 10-32 thread and 0.5 inch overall length spacing.

Installation Notes

Installation should be performed with power removed from the circuit board or enclosure before handling any PCB mounting hardware. Use an appropriate 0.375 inch hex wrench or nut driver to engage the body for tightening. Apply only hand-tight torque to avoid stripping threads on PCB-mounted inserts or thin panel stock. Follow applicable enclosure and panel assembly guidelines for your equipment type.