Edwards Signaling 48XBRMA120A Amber Led Signal Light 120VAC

Product Description

The EDWARDS SIGNALING 48XBRMA120A is a dual-mode LED signal light capable of operating in both flashing and steady output modes with an amber lens. Rated for 120VAC at 0.11 amps, this unit is designed for panel or half-inch pipe mounting and carries a NEMA 4X enclosure rating, making it suitable for wet, corrosive, and washdown environments. The LED light source delivers 65 flashes per minute in flash mode and provides a consistent steady output when switched to that mode. Licensed electricians and industrial maintenance technicians are the primary installers. The unit is built to withstand impact, vibration, and weather exposure across a wide operating temperature range, from -31 degrees F to 150.80 degrees F.

This signal light fits industrial, commercial, and utility signaling applications where a visible amber indicator is required. Typical installations include machinery status panels, HVAC equipment alarm boards, access control points, and process control stations. Its NEMA 4X rating makes it appropriate for both indoor and outdoor deployments, including environments subject to moisture, dust, or occasional chemical exposure. The panel or pipe mount options allow flexible positioning on enclosures or conduit runs without additional adapters.

Key Features

• Dual-mode operation: flashing at 65 flashes per minute or continuous steady output
• Amber LED lens for high-visibility status indication
• NEMA 4X rated for weather-proof, corrosive-environment service
• Impact-resistant, shatter-resistant, and vibration-resistant housing
• Panel mount and half-inch pipe mount compatible
• Wide operating temperature range: -31 degrees F to 150.80 degrees F
• cULus and UL Listed

Compatibility

Designed for use in standard 120VAC signaling circuits requiring a panel-mount or half-inch pipe-mount amber indicator light in NEMA 4X-rated enclosures or outdoor installations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC). Disconnect and lock out all power to the circuit before mounting or wiring the unit. Verify the supply voltage is 120VAC before connecting. For pipe-mount installations, use a half-inch threaded conduit fitting and ensure the mount is mechanically secure before restoring power.