Edwards Signaling 105XBRMA120A Amber Led Warning Light 120VAC

Product Description

The EDWARDS SIGNALING 105XBRMA120A is an amber LED warning light rated for both flashing and steady operation at 120VAC. Drawing only 0.11 amps, this unit mounts to panels, pipes, or walls and delivers 65 flashes per minute in flash mode. The shatter-resistant, vibration-resistant lens and NEMA 4X enclosure rating make it suitable for harsh and hazardous industrial environments. Licensed electricians and facility maintenance professionals typically install this fixture where a durable, low-current visual signal is required. The unit stands 4.75 inches tall with a 3.75-inch diameter.

This light is rated for use in hazardous locations including Class I Division 2 Groups A, B, C, and D; Class II Division 2 Groups F and G; and Class III locations. Its flexible mounting options — panel, 3/4-inch pipe, or wall — make it a practical choice for industrial plants, warehouses, machine guarding applications, and process control installations where a reliable visual annunciator is needed in demanding environments.

Key Features

• Dual-mode operation: flashing at 65 flashes per minute or steady illumination
• Amber LED lamp for high-visibility signaling
• NEMA 4X rated enclosure — suitable for wet, corrosive, and washdown environments
• Shatter-resistant and vibration-resistant lens for rugged service
• Three mount options: panel, 3/4-inch pipe, or wall
• UL Listed for Class I Div. 2 and Class II Div. 2 hazardous locations

Compatibility

Rated for use in Class I Division 2 Groups A, B, C, and D; Class II Division 2 Groups F and G; and Class III hazardous locations per UL 595 and UL 1598A. Designed for industrial signaling applications requiring NEMA 4X environmental protection.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC, including Article 501 and Article 502 requirements for hazardous location wiring. Disconnect and lock out power to the circuit before mounting or wiring this fixture. For pipe mount installations, use the 3/4-inch pipe entry point and verify conduit fittings are rated for the classified area. Do not exceed the rated voltage or bypass any sealing requirements mandated by the applicable hazardous location classification.