Ecm Industries Llc AMT-113 Heat Shrink Spade Terminal 16-14 Awg

Product Description

The ECM INDUSTRIES LLC AMT-113 is a heat shrink spade terminal designed for secure, insulated electrical connections in demanding service environments. Rated at 600 volts maximum and compatible with 16 to 14 AWG wire, this terminal uses a heat-activated adhesive liner that melts and flows during installation to form a watertight seal around the conductor. Stud size 8 mounting accommodates common terminal block and lug configurations. Sold in packs of 10, the AMT-113 is a practical choice for HVAC technicians, electricians, and marine service professionals who need reliable, moisture-resistant terminations on control wiring, equipment leads, and field splices.

This spade terminal is suited for residential and light commercial applications where connections are exposed to moisture, vibration, or environmental contaminants. The heat shrink construction protects against wire pullout, abrasion, salt water, oil, and gasoline, making it appropriate for equipment rooms, outdoor disconnects, pool and spa equipment enclosures, and marine installations. The stud size 8 spade fits standard screw terminals found across a wide range of HVAC controls, pumps, and electrical panels.

Key Features

• Heat-activated adhesive liner melts and flows to create a watertight seal around the wire
• Rated at 600 volts maximum for broad control and power wiring compatibility
• Accepts 16 to 14 AWG conductors for common control and equipment lead sizes
• Stud size 8 spade tongue fits standard screw terminals and lug points
• Resists salt water, oil, gasoline, and other environmental contaminants
• Protects connections from wire pullout and abrasion

Compatibility

Designed as an OEM-style replacement heat shrink spade terminal for 16 to 14 AWG wiring applications using stud size 8 mounting points across HVAC, electrical, plumbing, and pool service equipment.

Installation Notes

Installation is performed by licensed electricians or qualified HVAC and equipment service technicians following applicable NEC requirements. De-energize and lock out the circuit before terminating or replacing any wiring connection. Strip the conductor to the appropriate length, insert fully into the terminal barrel, crimp to secure the wire, then apply heat evenly with a heat gun until the shrink sleeve contracts and the adhesive flows to form a seal. Do not use an open flame to activate the heat shrink material.