Ecm Industries Llc 62110 Waterproof Wire Connector 6 Pack

Product Description

The ECM INDUSTRIES LLC 62110 is a safety-sealed waterproof wire connector designed for electrical splices that must stay protected from moisture, rain, and water intrusion. Sold in a 6-pack, each connector carries a voltage rating of 300 to 600 volts and meets both watertight and raintight performance requirements. The aqua blue and orange color scheme aids quick identification on the job. Licensed electricians and irrigation technicians reach for this connector when a standard twist-on cap is not adequate for the environment. The UL Listed and CSA Certified ratings confirm the connector meets recognized safety standards for use in wet or damp locations.

This connector is suited for outdoor and wet-location wiring applications where exposed splices are common. Typical install scenarios include low-voltage and line-voltage circuits in irrigation systems, trailer wiring harnesses, and marine or boat electrical connections. The sealed, watertight construction keeps moisture out of the splice, reducing the risk of corrosion-related failures in connections that are routinely exposed to weather or submersion. It is an appropriate choice anywhere an unsealed connector would create a code or safety concern.

Key Features

• Safety-sealed waterproof construction rated watertight and raintight
• Voltage range of 300 to 600 volts covers both low-voltage and standard line-voltage circuits
• UL Listed and CSA Certified for use in wet and damp locations
• Aqua blue and orange color coding for fast visual identification
• Sold as a 6-pack for efficiency on multi-splice jobs
• Suitable for irrigation, trailer, and marine wiring applications

Compatibility

Designed for use in irrigation systems, trailers, and boats where watertight or raintight wire splices are required at 300 to 600 volts.

Installation Notes

Installation should be performed by a qualified electrician or licensed trade professional in accordance with the NEC and any applicable local codes for wet or damp location wiring. De-energize the circuit completely and verify with a voltage tester before making or disturbing any splice. Twist the connector fully onto the prepared wire ends until the seal engages to ensure the waterproof integrity of the connection. Do not substitute this connector in applications that exceed its rated voltage range.