Ecm Industries Llc 20101 Direct Bury Wire Connector 4 Pack

Product Description

The ECM INDUSTRIES LLC 20101 is a tan, safety-sealed direct bury wire connector sold in a 4-pack, rated for 30-volt low-voltage applications only. It uses a specially formulated sealant that controls flashover, blocks moisture intrusion, reduces fire hazard, and prevents heat buildup and corrosion at the connection point. No junction box is required for installation, making it a fast, code-friendly solution for buried low-voltage wiring. Licensed electricians and irrigation technicians install this connector where underground splices need long-term moisture protection without additional enclosures. It carries UL Listed and CSA Certified ratings.

The 20101 is designed for direct burial in lawn irrigation systems where low-voltage wiring runs underground between controllers and valve solenoids. It is also suited for automotive and marine wiring applications where moisture resistance at splice points is critical. The sealed sealant compound self-encapsulates the connection, eliminating the need for heat shrink, tape wrap, or a waterproof junction box in qualifying low-voltage circuits. This connector is rated for 30 volts maximum and must not be used in line-voltage applications.

Key Features

• Rated 30 volts maximum — suitable for low-voltage irrigation, auto, and marine wiring
• Specially formulated sealant controls flashover and prevents moisture intrusion
• Reduces fire hazard and prevents heat buildup and corrosion at the splice
• No junction box required for direct burial installations
• UL Listed and CSA Certified
• Sold as a 4-pack for multi-zone or multi-splice jobs

Compatibility

Designed as a direct bury splice connector for 30-volt low-voltage wiring in lawn irrigation systems, automotive wiring, and marine applications where moisture-resistant underground or exposed splices are required.

Installation Notes

Installation is typically performed by licensed irrigation technicians or electricians working on low-voltage systems. Confirm the circuit does not exceed 30 volts before use — this connector is not rated for line-voltage wiring. Strip wire ends to the appropriate length, insert conductors fully into the connector, and crimp or twist per the connector design to activate the sealant. Verify the sealant has fully encapsulated the splice before backfilling any direct bury trench.