Ecm Industries Llc 20-107 Ring Terminal 600V 12-10 Awg 14 Pack

Product Description

The ECM INDUSTRIES LLC 20-107 is a 14-pack of vinyl insulated, solderless ring terminals designed for secure, reliable electrical connections in commercial and residential wiring applications. Each terminal features a vinyl insulated barrel rated at 600 volts maximum and accepts 12-10 AWG wire. The 1/4-inch stud size provides a firm mechanical connection to terminal blocks, bus bars, and equipment ground points. With a temperature rating of 167 degrees F (75 degrees C) and UL approval, these terminals meet the performance demands of licensed electricians and HVAC service technicians working on control panels, motor wiring, and field service repairs.

These ring terminals are suited for residential and light commercial electrical work, including control wiring in HVAC systems, panel board connections, and equipment grounding. The solderless crimp design speeds up installation and eliminates the need for solder flux or open flame in the field. They are compatible with standard insulated wire stripper-crimpers sized for 12-10 AWG conductors. The 14-pack quantity is practical for service vans and job-site kits where multiple terminations are needed in a single call.

Key Features

• Vinyl insulated barrel provides dielectric protection and strain relief at the termination point
• Solderless crimp design for fast, flame-free installation
• Rated at 600 volts maximum for use in standard branch-circuit and control-circuit wiring
• Accepts 12-10 AWG wire to cover common residential and commercial conductor sizes
• 1/4-inch stud size fits widely used terminal block and lug configurations
• UL approved and temperature rated to 167 degrees F (75 degrees C)

Compatibility

Designed as an OEM-style solderless ring terminal for use with 12-10 AWG copper conductors terminated to 1/4-inch studs in standard electrical and HVAC control wiring applications.

Installation Notes

Installation should be performed by a licensed electrician or qualified HVAC technician in accordance with the NEC and applicable local codes. De-energize and lock out the circuit before making any terminations. Use a calibrated insulated crimp tool rated for 12-10 AWG terminals to ensure a gas-tight, mechanically sound crimp. Inspect the vinyl insulation after crimping to confirm it is not cracked or displaced before restoring power.