Ecm Industries Llc 20-105 Ring Terminal 16-14 Awg 600V 17 Pack

Product Description

The ECM INDUSTRIES LLC 20-105 is a 17-pack of vinyl-insulated, solderless ring terminals designed for secure, reliable electrical connections in field wiring and panel work. Each terminal accepts 16-14 AWG wire and fits a 1/4-inch stud, making it a standard choice for grounding lugs, bus bars, and terminal blocks. The vinyl barrel insulation is rated for up to 600 volts maximum and a temperature of 167 degrees F (75 degrees C), suitable for the thermal ranges found in HVAC control panels, electrical enclosures, and light commercial wiring applications. UL approval confirms the terminals meet established performance and safety standards.

These ring terminals are suited for residential and light commercial electrical work where solderless, compression-style terminations are required. Electricians, HVAC technicians, and panel wiring pros use this style of terminal when making wire-to-stud connections at ground lugs, transformer secondary leads, and motor control terminals. The 17-unit pack format is practical for service calls where a small quantity of terminals is needed without carrying bulk inventory.

Key Features

• Vinyl-insulated barrel provides electrical insulation up to 600 volts maximum
• Solderless crimp design compatible with standard terminal crimping tools
• Wire range: 16-14 AWG for common control and power wiring sizes
• 1/4-inch stud size fits standard grounding and terminal hardware
• Temperature rating of 167 degrees F (75 degrees C) for typical enclosure environments
• UL approved for code-compliant installations

Compatibility

Designed as a general-purpose solderless ring terminal for use with 16-14 AWG wire on 1/4-inch stud connections in electrical, HVAC, and light commercial panel applications.

Installation Notes

Installation is performed by licensed electricians or qualified HVAC technicians in accordance with NEC guidelines for termination methods. Always de-energize the circuit and verify zero voltage with a meter before making or breaking any connections. Use a properly sized ratcheting crimp tool rated for insulated terminals to ensure a gas-tight crimp on the wire barrel. Do not solder over a crimped connection, as this can create a stress point and degrade conductivity over time.