Eaton H27504RD-600R Multipurpose Air Hose 1/4 in Pvc Red

Product Description

The EATON H27504RD-600R is a multipurpose PVC air hose sold in cut-to-length increments from a 600-foot bulk coil. It carries a 1/4-inch inner diameter and a 1/2-inch outer diameter, with a working pressure rating of 250 psi. The operating temperature range runs from -10 degrees F to 150 degrees F, making it suitable for year-round shop and field use. This hose is designed for pneumatic tool lines, general compressed air distribution, and light-duty fluid transfer applications. It ships without end fittings, allowing installers to terminate with the connectors required for their specific setup.

This hose is well suited to HVAC shops, plumbing contractors, auto service facilities, and general maintenance environments where a flexible, cost-effective air supply line is needed. The minimum cut length is 25 feet, priced per 1-foot increment. The red PVC construction provides easy visual identification on busy job sites. Installers working from a service van or shop will find bulk cut lengths practical for custom pneumatic whip lines and equipment drops.

Key Features

• 250 psi working pressure suitable for standard shop air systems
• 1/4-inch ID delivers adequate flow for most pneumatic hand tools
• PVC construction is lightweight and resistant to kinking under normal shop conditions
• Temperature rated from -10 degrees F to 150 degrees F for year-round use
• No end connections included, allowing full flexibility in fitting selection
• Sold in 1-foot increments with a 25-foot minimum cut from a 600-foot coil

Compatibility

Designed as a general-purpose cut-to-length air hose suitable for compressed air distribution systems operating within the rated pressure and temperature range. No specific equipment compatibility data was provided by the manufacturer for this SKU.

Installation Notes

Installation should be performed by a qualified technician familiar with compressed air system plumbing. Depressurize the air supply line fully before cutting, connecting, or removing any hose section. Use appropriate barbed or swaged fittings rated at or above 250 psi and secure with clamps per the fitting manufacturer guidelines. Do not exceed the published working pressure or temperature limits of this hose.