Eaton H177616-300R Oil Resistant Air Hose 1in Id 325 Psi

Product Description

The EATON H177616-300R is an oil resistant air hose designed for compressed air delivery in industrial and trade environments where petroleum-based fluids, oils, and lubricants are present. Built with a Buna-N (nitrile rubber) construction, this hose resists degradation from oil contact that would cause standard rubber hoses to swell or fail prematurely. It carries a 325 psi working pressure rating and handles a temperature range of -40 degrees F to 180 degrees F, making it suitable for both outdoor cold-weather service and heated shop environments. The hose ships in cut-to-length increments from a 300-foot coil, with a 20-foot minimum cut length per order. Licensed plumbers, pipefitters, and industrial maintenance technicians are the typical installers.

This hose is used in manufacturing facilities, automotive service shops, fleet maintenance operations, and industrial plants where compressed air lines run through areas exposed to oil mist, hydraulic fluid, or lubricant spray. The cut-to-length format allows installers to size runs precisely without excess waste. With no end connections included, fittings are field-installed to match the specific application requirements. The red color aids in quick visual identification of air service lines within a facility.

Key Features

• Oil resistant Buna-N (nitrile rubber) construction resists swelling and degradation from petroleum-based fluids
• 325 psi working pressure suitable for standard industrial compressed air service
• Operating temperature range of -40 degrees F to 180 degrees F for cold-weather and heated environments
• Cut-to-length format from a 300-foot coil with 20-foot minimum order increment
• Red jacket for easy visual identification of air service lines
• No end connections included, allowing field selection of compatible fittings

Compatibility

Designed as a cut-to-length oil resistant air hose for industrial compressed air systems requiring nitrile rubber construction. No specific equipment compatibility data was provided by the manufacturer for this SKU.

Installation Notes

Installation should be performed by a qualified pipefitter, plumber, or industrial maintenance technician familiar with compressed air system requirements. Depressurize and lock out the air supply before connecting or disconnecting any hose section. End fittings must be rated at or above the 325 psi working pressure of this hose and secured with appropriate clamps or crimp fittings per the fitting manufacturer guidelines. Inspect the hose and all connections for leaks before returning the system to service.