Eaton H06910-250R Hydraulic Hose 0.5 in Id 1750 Psi

Product Description

The EATON H06910-250R is a bulk hydraulic hose rated for 1,750 psi working pressure, sold in 1-foot increments with a 10-foot minimum cut length from a 250-foot coil. The hose features a 0.5-inch inside diameter and a 59/64-inch outside diameter, constructed with a nitrile tube that handles petroleum-based hydraulic fluids. Rated for temperatures from -40 degrees F to 212 degrees F, it is suited for mobile equipment, industrial hydraulic circuits, and power unit plumbing. Licensed hydraulic technicians and fluid power mechanics are the primary installers of this type of hose in production and maintenance environments.

This hose is appropriate for medium-pressure hydraulic systems found in construction equipment, agricultural machinery, industrial machinery, and shop hydraulic power units. The black nitrile construction resists oil and petroleum fluid degradation. With a 5.5-inch bend radius, it can be routed through tight machine frames without kinking. The 250-foot coil format suits shops and distributors that cut hose assemblies to order rather than stocking pre-cut lengths.

Key Features

• 1,750 psi working pressure with a 7,000 psi burst pressure rating
• 0.5-inch inside diameter and 59/64-inch outside diameter
• Nitrile tube material compatible with petroleum-based hydraulic fluids
• Operating temperature range of -40 degrees F to 212 degrees F
• 5.5-inch minimum bend radius allows routing in confined spaces
• Sold from a 250-foot coil in 1-foot increments with a 10-foot minimum cut length

Compatibility

Designed as an OEM-style replacement or new-installation hydraulic hose for medium-pressure hydraulic circuits using petroleum-based fluid, typical of mobile equipment and industrial power units.

Installation Notes

Installation should be performed by a qualified fluid power technician or hydraulic system mechanic. Depressurize and lock out the hydraulic system completely before cutting, fitting, or replacing any hose segment. Use proper hose cutters to ensure a clean, square cut before crimping or attaching fittings, and verify fitting compatibility with hose ID and working pressure rating. Avoid routing hose in contact with sharp edges or heat sources without protective sleeving.