Eaton 3270-0810-1000 Polyamide Tube 3/8in Id 950 Psi Ctl

Product Description

The EATON 3270-0810-1000 is a black polyamide tube rated for high-pressure pneumatic and fluid-transfer applications in industrial and mechanical systems. It ships in a standard 1000-foot coil cut to length, giving installers flexibility to portion runs as needed on the job. The inside diameter measures 0.376 inches (9.55 mm) with an outside diameter of 0.500 inches (12.70 mm) and a wall thickness of 0.062 inches (1.57 mm). Maximum working pressure is 950 psi. Licensed HVAC technicians, plumbers, and industrial mechanics typically specify this tubing wherever a lightweight, chemical-resistant, high-pressure-rated line is required.

This polyamide tube is suited for compressed-air distribution, pneumatic control lines, instrumentation runs, and fluid conveyance in both commercial and light industrial environments. The cut-to-length format makes it practical for field routing around equipment, panels, and structural members without waste. It performs reliably in applications that demand resistance to abrasion, hydrocarbons, and moderate heat. The 1000-foot standard coil length accommodates large-scale installations or multiple smaller jobs from a single spool.

Key Features

• 950 psi maximum working pressure for demanding pneumatic and fluid-transfer service
• Polyamide construction provides abrasion resistance and chemical compatibility with hydrocarbons and common lubricants
• 0.376 inches ID and 0.500 inches OD with a 0.062-inch wall for consistent flow area and pressure integrity
• Cut-to-length format from a 1000-foot standard coil reduces on-site waste
• Minimum order quantity of 25 units supports contractor and wholesale purchasing

Compatibility

Designed as a general-purpose polyamide pneumatic and fluid-transfer tube compatible with standard 3/8-inch ID push-to-connect, compression, and barbed fittings used in pneumatic control and instrumentation systems.

Installation Notes

Installation is typically performed by licensed HVAC technicians, pipefitters, or instrumentation mechanics. Depressurize and lock out any pneumatic or fluid system before cutting into existing lines or making connections. Use a clean, square tube cut to ensure proper seating in push-to-connect or compression fittings and to maintain rated working pressure. Follow applicable codes, including ASME B31 piping standards, when routing and securing tubing runs.