Easyflex efsv-ag-38ft38c Angle Stop Valve 3/8 in

Product Description

The EASYFLEX efsv-ag-38ft38c is a chrome-plated brass angle stop valve designed for residential and light commercial plumbing shutoff applications. It features a 3/8 inch nominal size with FNPT x Compression connection ends, making it a standard quarter-turn shutoff for supply lines serving fixtures such as toilets, lavatory faucets, and similar point-of-use applications. The valve is rated to 125 psi and 180 degrees F, with a brass body, NBR softgoods for reliable sealing, and a zinc handle actuator for positive manual operation. It is installed by licensed plumbers and experienced plumbing tradespeople.

This angle stop valve is suited for residential and light commercial water supply shutoff service. It is typically installed at the wall or floor stub-out feeding a fixture supply line. The FNPT inlet connects to a threaded iron pipe or fitting, while the compression outlet accepts standard copper or compatible tubing. The chrome-plated finish provides a clean appearance in exposed under-sink or in-wall alcove installations. Brass and copper trim components with PTFE contribute to long-term sealing performance under normal domestic water supply conditions.

Key Features

• Brass body construction for corrosion resistance in potable water service
• FNPT x Compression connection for straightforward installation on threaded pipe and compression tubing
• 125 psi pressure rating suitable for standard residential supply line pressures
• 180 degrees F temperature rating covering typical domestic hot water supply
• NBR softgoods provide durable sealing against water at rated conditions
• Chrome-plated finish for a clean appearance in visible installations

Compatibility

Designed as an OEM-style replacement or new-installation angle stop valve for 3/8 inch nominal residential and light commercial plumbing supply shutoff applications with FNPT x Compression connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC requirements. Shut off the main water supply and relieve system pressure before removing any existing valve or fitting. Apply thread sealant or PTFE tape to male NPT threads before engagement, and use appropriate compression ferrule and nut on the outlet tubing. Do not overtighten compression fittings, as this can damage the ferrule and compromise the seal.