Eagle Cutting Tool VM4350-018-6-D Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL VM4350-018-6-D is a carbide-tipped masonry drill bit designed for boring through concrete, brick, block, and similar hard masonry materials. With a 9/32 inch diameter and a 6 inch overall length (OAL), this bit provides the reach needed for deeper anchor and fastener holes common in commercial and residential construction work. The carbide tip holds an edge longer than standard steel under the abrasive conditions masonry drilling demands. This bit is manufactured in the USA and suited for use by electricians, plumbers, HVAC technicians, and general contractors who routinely drill into masonry substrates on the job.

This bit fits standard rotary hammer and hammer drill chucks sized for 9/32 inch shanks and is appropriate for applications where penetrations through concrete or masonry walls, floors, or ceilings are required. Typical uses include setting anchor bolts, running conduit sleeves, installing pipe hangers, and mounting equipment to structural masonry. The 6 inch OAL accommodates through-wall penetrations in typical residential and light commercial construction.

Key Features

• Carbide tip for extended wear life in abrasive masonry materials
• 9/32 inch diameter suits common anchor and fastener hole sizing
• 6 inch overall length provides reach for deeper penetrations
• Made in the USA
• Compatible with standard rotary hammer and hammer drill chucks

Compatibility

Designed as a standard carbide-tipped masonry drill bit for use in rotary hammer drills and hammer drills accepting a 9/32 inch bit diameter.

Installation Notes

Masonry drilling is typically performed by licensed tradespeople during rough-in or finish phases of construction. Always wear appropriate eye protection and a dust mask when drilling into concrete or masonry. Confirm there are no embedded conduit, rebar, or utility lines in the drilling path before starting. Use the hammer or rotary hammer setting appropriate for the substrate and allow the bit to do the work without excessive downward pressure to avoid premature tip wear.

Technical Specifications

• Diameter: 9/32 inch
• Overall Length (OAL): 6 inches
• Tip Type: Carbide Tip
• Application: Masonry
• Country of Origin: USA
• Weight: 0.75 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: VM4350-018-6-D