Eagle Cutting Tool VM4350-012-6-D Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL VM4350-012-6-D is a carbide-tipped masonry drill bit designed for drilling into concrete, brick, block, mortar, and similar masonry substrates. With a 3/16-inch diameter and a 6-inch overall length, this bit provides the reach needed for anchor setting, conduit routing, and through-hole applications in masonry walls and slabs. The carbide tip delivers the hardness required to penetrate abrasive materials without rapid wear. Manufactured in the USA, this bit is suited for use by electricians, plumbers, HVAC technicians, and general contractors who regularly work with masonry in commercial and residential construction.

This bit is appropriate for use in residential and light commercial applications where masonry penetration is required. Typical uses include drilling for anchor bolts, pipe sleeves, conduit penetrations, and fastener points in poured concrete, CMU block, and brick construction. The 6-inch overall length gives adequate depth capacity for standard wall thicknesses and structural anchor installations. It is intended for use with standard rotary hammer drills or hammer drills equipped with a keyed or keyless chuck.

Key Features

• Carbide tip construction for extended wear life in abrasive masonry materials
• 3/16-inch diameter for anchor bolt, conduit, and fastener hole applications
• 6-inch overall length provides reach for standard wall and slab penetrations
• Made in the USA
• Minimum order quantity of 1 for flexible purchasing

Compatibility

Designed as an OEM-style replacement or direct-use masonry drill bit compatible with standard rotary hammer drills and hammer drills accepting round or hex shank bits in the 3/16-inch size range.

Installation Notes

Masonry drilling should be performed by a qualified tradesperson familiar with the substrate being penetrated. Always wear appropriate personal protective equipment including eye protection and a dust respirator when drilling masonry. Confirm there are no embedded conduit, rebar, or utilities in the drilling path before beginning. Use the correct hammer or rotary hammer drill setting for the substrate to avoid bit damage or premature wear.

Technical Specifications

• Diameter: 3/16 inches
• Overall Length (OAL): 6 inches
• Tip Material: Carbide
• Country of Origin: USA
• Weight: 0.75 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: VM4350-012-6-D