Eagle Cutting Tool VM4350-008-6-D Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL VM4350-008-6-D is a carbide-tipped masonry drill bit designed for drilling into concrete, block, brick, and other masonry materials. With a 0.125-inch (1/8-inch) diameter and a 6-inch overall length, this bit provides extended reach in deep-bore applications where standard-length bits fall short. The carbide tip delivers the hardness needed to penetrate dense masonry substrates without rapid wear. This bit is used by licensed electricians, plumbers, HVAC technicians, and general contractors who need to run conduit, pipe, or wire penetrations through masonry walls and concrete structures.

This drill bit is suited for light-diameter penetration work in residential and commercial masonry installations. Typical applications include anchor hole preparation, conduit pass-through drilling, and fastener pilot holes in concrete block or brick. The 6-inch OAL allows the user to drill through standard CMU block walls and thick concrete in a single pass without extensions. It is compatible with standard rotary hammer and hammer drill chucks accepting 1/8-inch shank tooling.

Key Features

• Carbide tip for extended service life in abrasive masonry materials
• 0.125-inch diameter suits small-diameter penetration and anchor pilot work
• 6-inch overall length provides reach through standard CMU block walls
• Compatible with hammer drills and rotary hammers accepting 1/8-inch shank bits
• Minimum order quantity of 1 allows single-unit purchase for service calls

Compatibility

Designed as an OEM-style replacement and standard-format masonry drill bit for use in hammer drills and rotary hammers that accept a straight 1/8-inch shank.

Installation Notes

Install this bit in a hammer drill or rotary hammer set to hammer-drill mode for masonry work. Always wear appropriate eye protection and dust respiratory protection when drilling concrete or masonry. Ensure the chuck is fully tightened before operation and inspect the carbide tip for cracks or damage before each use. Confirm local building and fire codes for sleeve anchor and conduit penetration requirements before drilling in structural or fire-rated assemblies.

Technical Specifications

• Diameter: 0.125 inches (1/8 inch)
• Overall Length (OAL): 6 inches
• Tip Material: Carbide
• Weight: 0.63 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: VM4350-008-6-D