Eagle Cutting Tool TSE500-SP7-I Screw Extractor 7 Spi

Product Description

The EAGLE CUTTING TOOL TSE500-SP7-I is a flat-type screw extractor rated at 7 spirals per inch (SPI), designed to remove broken, stripped, or seized fasteners from metal, wood, and composite materials. This import-grade extractor is used by plumbers, HVAC technicians, electricians, and general tradespeople when a fastener head is damaged beyond the reach of standard drive tools. The flat extractor geometry bites into the fastener material as reverse torque is applied, pulling the broken shank or stud out of the bore without damaging the surrounding threads.

This extractor is suited for service and repair work across residential and light commercial applications. Common install scenarios include removing sheared machine screws, broken stud bolts, and snapped pipe plugs encountered during HVAC equipment service, plumbing repairs, and electrical panel or conduit work. The 7 SPI rating indicates the thread pitch of the extractor flutes, which determines the fastener size range this tool is designed to engage.

Key Features

• Flat extractor profile for secure engagement with broken or stripped fasteners
• 7 spirals per inch (SPI) flute pitch for precise fastener size targeting
• Reverse-turn operation backs fasteners out without thread damage to the parent material
• Minimum order quantity of 1 unit, suitable for single-piece procurement
• Import-grade construction for cost-effective inclusion in service kits

Compatibility

Designed as a general-purpose flat screw extractor for use with broken or stripped fasteners matching the 7 SPI flute engagement range. Consult the manufacturer sizing chart to confirm compatibility with the target fastener diameter before use.

Installation Notes

Screw extractors are typically used by licensed tradespeople with access to a drill press or handheld drill capable of reverse rotation. Before extraction, the work area should be de-energized or depressurized as appropriate for the system being serviced. A pilot hole is drilled into the center of the broken fastener before the extractor is seated; use of a center punch is recommended to prevent bit walking. Never apply excessive side load to the extractor, as extractor breakage inside the bore will complicate removal significantly.

Technical Specifications

• Flute Type: Flat
• Spirals Per Inch (SPI): 7
• Weight: 4.09 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: TSE500-SP7-I