Eagle Cutting Tool SDS4350-8750-18-D Sds Masonry Drill

Product Description

The EAGLE CUTTING TOOL SDS4350-8750-18-D is an SDS-shank masonry drill bit built for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit features a delta-style carbide tip geometry designed to optimize penetration and debris clearing in demanding drilling applications. At 7/8 inch in diameter and 18 inches in overall length, it provides extended reach for through-wall anchoring, conduit penetrations, and structural drilling tasks. Licensed contractors, electricians, and plumbers routinely use bits in this class when setting anchors or running pipe and conduit through masonry construction.

This bit is suited for residential and commercial masonry drilling where an SDS-plus or SDS rotary hammer is the specified tool. The 18-inch overall length is well matched to penetrations through CMU block walls, thick concrete slabs, and similar substrates. The delta tip configuration aids in chip evacuation, reducing heat buildup and extending bit life during continuous drilling operations. It is a practical fit for electrical and mechanical rough-in work, concrete forming, and general construction trades.

Key Features

• Delta-style carbide tip for improved penetration and chip clearance in masonry
• 7/8 inch cutting diameter for anchor and conduit penetration applications
• 18-inch overall length provides extended reach through thick masonry assemblies
• SDS shank for secure, tool-free chuck engagement on SDS rotary hammers
• Designed for concrete, brick, block, and similar hard masonry materials

Compatibility

Designed for use with SDS rotary hammers accepting standard SDS-shank drill bits. Suitable for masonry drilling applications across residential and commercial construction trades.

Installation Notes

This bit is installed and used by licensed electricians, plumbers, and general contractors performing masonry penetration work. Always wear appropriate eye protection and dust control measures when drilling masonry. Confirm that no embedded conduit, rebar, or utilities are present in the drilling path before beginning. Operate the rotary hammer per the tool manufacturer guidelines and allow the bit to cool periodically during extended drilling to preserve carbide tip integrity.

Technical Specifications

• Cutting Diameter: 7/8 inches
• Overall Length (OAL): 18 inches
• Shank Type: SDS
• Tip Style: Delta Carbide
• Weight: 1.16 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-8750-18-D