Eagle Cutting Tool SDS4350-7500-24-D Sds Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-7500-24-D is an SDS-plus masonry drill bit built for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit features a delta-style carbide tip geometry designed to reduce heat buildup and improve chip evacuation during drilling. At 24 inches overall length with a 3/4-inch diameter, this bit handles deep-penetration applications such as anchor bolt holes, conduit sleeves, and structural through-penetrations. Electricians, HVAC installers, and plumbers routinely reach for a bit in this configuration when core anchoring or pipe sleeve work is required through poured concrete or CMU walls.

This bit is suited for use in residential and commercial construction and service environments wherever an SDS-plus rotary hammer is the specified tool. The 24-inch overall length makes it well suited for deep-set anchor holes and through-wall penetrations in walls of significant thickness. The 3/4-inch diameter matches common sleeve anchor and drop-in anchor specifications frequently specified on mechanical and electrical drawings.

Key Features

• Delta carbide tip geometry for improved chip clearance and reduced tip heat
• 3/4-inch cutting diameter for anchor and sleeve hole applications
• 24-inch overall length for deep-penetration and through-wall drilling
• SDS-plus shank for positive bit retention in compatible rotary hammers
• Designed for masonry substrates including concrete, brick, block, and stone

Compatibility

Designed for use with SDS-plus rotary hammers. Compatible with standard SDS-plus chuck systems common across major rotary hammer platforms.

Installation Notes

Installation should be performed by a qualified tradesperson familiar with rotary hammer operation and applicable codes. Confirm the SDS-plus shank is fully seated and locked in the rotary hammer chuck before drilling. Wear appropriate PPE including eye protection and hearing protection when operating rotary hammer equipment. Do not use this bit in a standard drill chuck or SDS-max tool without a proper adapter confirmation.

Technical Specifications

• Cutting Diameter: 3/4 inches
• Overall Length (OAL): 24 inches
• Shank Type: SDS-plus
• Tip Style: Delta carbide
• Application: Masonry, concrete, brick, block
• Weight: 0.78 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-7500-24-D