Eagle Cutting Tool SDS4350-6250-24-D Sds Masonry Drill

Product Description

The EAGLE CUTTING TOOL SDS4350-6250-24-D is an SDS-shank masonry drill bit with a delta tip geometry, designed for rotary hammer drilling through concrete, block, brick, and other masonry materials. The bit features a 5/8 inch diameter and a 24 inch overall length, making it well suited for deep-penetration applications such as anchor holes, through-wall penetrations, and conduit or pipe sleeve work. At 1.14 pounds, the bit carries enough mass for controlled drilling while remaining manageable in overhead or confined-space installations. Masonry contractors, electricians, and plumbers reach for this type of bit when core layout or anchor placement demands extended reach beyond a standard-length tool.

This drill bit is used in commercial and residential construction and service work wherever rotary hammer drilling into masonry substrates is required. The 24 inch overall length is particularly practical when drilling through thick CMU walls, concrete decks, or multiple-wythe brick assemblies in a single pass. It is appropriate for use with SDS-style rotary hammers, which are standard equipment on most trade job sites and service vehicles.

Key Features

• 5/8 inch diameter delivers a bore sized for common anchor and sleeve applications
• 24 inch overall length allows single-pass penetration through thick masonry assemblies
• Delta tip geometry promotes efficient material removal and reduced bit walking on entry
• SDS shank provides positive engagement with rotary hammer chucks for secure power transfer
• 1.14 pound weight balances drilling mass with operator control

Compatibility

Designed for use with SDS rotary hammers; compatible with any tool accepting a standard SDS shank. Suitable for drilling concrete, brick, block, and similar masonry materials.

Installation Notes

This bit is installed and used by masonry contractors, electricians, plumbers, and general construction trades operating rotary hammer drills. Ensure the rotary hammer is fully powered off and the bit is firmly seated and locked in the SDS chuck before drilling begins. When drilling near existing utilities or rebar, follow applicable local codes and verify substrate conditions before penetrating structural elements. Wear appropriate eye and respiratory protection when cutting masonry materials.

Technical Specifications

• Diameter: 5/8 inches
• Overall Length (OAL): 24 inches
• Shank Type: SDS
• Tip Geometry: Delta
• Application: Masonry
• Weight: 1.14 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-6250-24-D