Eagle Cutting Tool SDS4350-5625-18-D Sds Masonry Drill

Product Description

The EAGLE CUTTING TOOL SDS4350-5625-18-D is an SDS-shank masonry drill bit engineered for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit measures 9/16 inch in diameter with an 18-inch overall length, making it well-suited for deep anchor holes and through-penetration work where standard-length bits fall short. The delta-style tip geometry promotes aggressive material removal and reduces heat buildup during extended drilling cycles. Installers across mechanical, electrical, and plumbing trades rely on this bit profile when setting anchors, running conduit sleeves, or core-boring through masonry walls.

This bit is intended for use with SDS-chuck rotary hammers in residential and light commercial construction and service applications. The 18-inch OAL makes it particularly useful when drilling through thick CMU walls, poured concrete foundations, or stacked masonry where shorter bits cannot reach full depth in a single pass. It is a common choice for HVAC, plumbing, and electrical rough-in work that requires precise, clean-entry holes through masonry assemblies.

Key Features

• 9/16 inch diameter for mid-range anchor and sleeve applications
• 18-inch overall length for deep-penetration drilling through thick masonry
• Delta-style carbide tip for efficient material removal in concrete and block
• SDS shank for positive bit retention in rotary hammer chucks
• Lightweight at 0.3 pounds for reduced fatigue during overhead or extended drilling

Compatibility

Designed for use with standard SDS-chuck rotary hammers commonly used in masonry drilling applications across HVAC, plumbing, and electrical trades.

Installation Notes

This bit is installed and operated by licensed tradespeople using SDS rotary hammers set to hammer-drill mode for masonry work. Confirm the chuck is fully seated and locked before drilling. Wear appropriate PPE including eye protection and dust control measures in accordance with OSHA and site safety requirements. Do not use in standard keyless drill chucks, as the SDS shank requires a compatible rotary hammer chuck.

Technical Specifications

• Diameter: 9/16 inch
• Overall Length (OAL): 18 inches
• Shank Type: SDS
• Tip Style: Delta
• Application: Masonry
• Weight: 0.3 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-5625-18-D