Eagle Cutting Tool SDS4350-5000-10-D Sds Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-5000-10-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and other masonry substrates. With a 1/2 inch cutting diameter and an overall length of 10-5/8 inches, this bit gives trades professionals the reach needed for anchor installation, conduit penetrations, and through-wall applications. The Delta tip geometry is engineered to clear debris efficiently and maintain straight bore alignment in hammer-drill mode. Electricians, plumbers, and HVAC installers commonly use bits in this size range for sleeve anchors and core penetrations in concrete construction.

This bit is suited for residential and light commercial masonry work where an SDS-plus rotary hammer is the tool of choice. The 10-5/8 inch overall length allows drilling through standard CMU block or thick concrete slabs without an extension. Typical applications include setting anchor bolts, drilling for conduit hangers, and creating pipe or refrigerant line penetrations through masonry walls. The 1/2 inch diameter is a widely specified size for wedge anchors and sleeve anchors used across electrical, mechanical, and plumbing rough-in work.

Key Features

• 1/2 inch cutting diameter for anchor and penetration work in masonry
• 10-5/8 inch overall length provides reach for deep or through-wall bores
• SDS shank for secure, tool-free chuck engagement in SDS-plus rotary hammers
• Delta tip geometry aids debris evacuation and straight-line drilling
• Lightweight at 0.41 pounds for reduced fatigue during overhead or extended use

Compatibility

Designed for use with SDS-plus rotary hammers. Fits any standard SDS-plus chuck. Suitable for drilling concrete, brick, block, and similar masonry materials.

Installation Notes

This bit is installed and used by electricians, plumbers, pipefitters, and HVAC mechanics working with rotary hammer tools on masonry substrates. Confirm the rotary hammer is set to hammer-drill mode and the bit is fully seated and locked in the SDS chuck before operation. Wear appropriate eye and respiratory protection when drilling masonry to guard against dust and debris. Follow applicable OSHA silica dust control requirements when drilling concrete or block in occupied or enclosed spaces.

Technical Specifications

• Cutting Diameter: 1/2 inch
• Overall Length (OAL): 10-5/8 inches
• Shank Type: SDS
• Tip Style: Delta
• Weight: 0.41 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-5000-10-D