Eagle Cutting Tool SDS4350-2500-16-D Sds Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-2500-16-D is an SDS masonry drill bit designed for drilling into concrete, block, brick, and similar masonry materials. The bit measures 1/4 inch in diameter with a 16-inch overall length (OAL), giving it the reach needed for deep anchor holes and through-wall applications. It features a Delta-style carbide tip geometry engineered to clear debris efficiently while maintaining cutting speed. This bit fits any SDS-type rotary hammer and is a standard tool for masonry and concrete work performed by licensed contractors and trade professionals.

This bit is suited for residential and commercial masonry applications where a standard 3/8-inch chuck drill would be insufficient. Typical uses include setting sleeve anchors, drilling conduit penetrations through CMU walls, and boring holes for mechanical fasteners in poured concrete. The 16-inch OAL makes it practical for full-thickness block wall penetrations without extensions. It is commonly used by electricians, plumbers, and HVAC technicians when making building penetrations for pipe, conduit, or refrigerant line sets.

Key Features

• 1/4 inch cutting diameter for anchor and penetration hole sizing
• 16-inch overall length provides reach for full-thickness masonry walls
• Delta carbide tip geometry for efficient debris evacuation and cutting speed
• SDS shank for positive engagement with SDS rotary hammer chucks
• Lightweight at 0.25 pounds for reduced fatigue during overhead or extended use

Compatibility

Designed as an OEM-style replacement and standard fit for SDS rotary hammers accepting SDS-style shank drill bits used in masonry and concrete drilling applications.

Installation Notes

This bit is installed and used by licensed trade contractors including electricians, plumbers, and HVAC technicians performing building penetrations. Always wear appropriate PPE including eye protection and dust respiratory protection when drilling masonry. Ensure the rotary hammer is in the correct SDS mode for the material being drilled and that the bit is fully seated and locked in the chuck before operation. Follow applicable OSHA and local jobsite safety requirements for rotary hammer use.

Technical Specifications

• Cutting Diameter: 1/4 inch
• Overall Length (OAL): 16 inches
• Shank Type: SDS
• Tip Style: Delta Carbide
• Weight: 0.25 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-2500-16-D