Eagle Cutting Tool SDS4350-2188-24-D Sds Masonry Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-2188-24-D is a carbide-tipped SDS masonry drill bit engineered for rotary hammer drilling into concrete, block, brick, and other masonry substrates. Built with a delta flute design, this bit moves debris out of the hole efficiently, reducing heat buildup and extending cutting life. The 7/32-inch diameter and 24-inch overall length make it well suited for through-wall and deep-anchor applications where standard-length bits fall short. Licensed contractors and trade professionals reaching for this bit will find it fits any SDS-style rotary hammer chuck without adapters.

This bit is used in residential and light commercial masonry drilling tasks, including anchor setting, conduit penetrations, and structural fastener prep work. The 24-inch overall length is especially useful for drilling through thick CMU walls or concrete slabs where depth and clearance are both concerns. Electricians, plumbers, and general contractors routinely specify long-barrel SDS bits for through-penetration work on commercial job sites and new construction.

Key Features

• Carbide tip for extended wear life in concrete, brick, and block
• Delta flute geometry promotes fast chip and dust evacuation
• 24-inch overall length for deep or through-wall drilling applications
• 7/32-inch diameter suits small-anchor and conduit-sleeve work
• SDS shank fits standard SDS rotary hammer chucks without adapters

Compatibility

Designed as an OEM-style replacement or direct-use bit for SDS-chuck rotary hammers used in standard masonry drilling applications.

Installation Notes

Installation of this bit requires an SDS-compatible rotary hammer; confirm the tool chuck type before inserting. Always wear appropriate PPE including eye protection and a dust mask when drilling masonry, and follow OSHA silica dust control guidelines where applicable. Secure the workpiece or confirm wall cavity contents before drilling through-wall penetrations.

Technical Specifications

• Shank Type: SDS
• Tip Material: Carbide
• Flute Design: Delta
• Drill Diameter: 7/32 inches
• Overall Length (OAL): 24 inches
• Weight: 0.25 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-2188-24-D