Eagle Cutting Tool SDS4350-1562-6-D Sds Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-1562-6-D is an SDS-type masonry drill bit engineered for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit measures 5/32 inch in diameter with an overall length of 6-5/8 inches, making it well suited for anchoring and through-hole work in medium-depth applications. The Delta tip geometry is designed to maintain cutting efficiency and resist walking on hard surfaces. Licensed contractors, masons, and electricians commonly reach for this bit when setting anchors or running conduit through masonry walls.

This bit is used in residential and light commercial construction and renovation work where an SDS rotary hammer is the tool of choice. Typical applications include drilling anchor holes in poured concrete and CMU block, creating penetrations for conduit, and core work in brick veneer. The 5/32 inch diameter is a common size for small-diameter anchors and fastener pilot holes in masonry assemblies.

Key Features

• Delta tip geometry for aggressive masonry penetration and reduced bit walking
• SDS shank for positive engagement in SDS rotary hammer chucks
• 5/32 inch cutting diameter suited for small anchor and fastener hole applications
• 6-5/8 inch overall length provides reach for moderate-depth penetrations
• Lightweight at 0.08 pounds for reduced fatigue during repetitive drilling tasks

Compatibility

Designed for use with standard SDS rotary hammer drills. Compatible with any tool featuring an SDS-style chuck accepting bits of this shank type.

Installation Notes

Installation should be performed by a qualified tradesperson familiar with rotary hammer operation and applicable safety codes. Always wear appropriate eye and hearing protection when drilling masonry. Confirm the drill is in rotary hammer mode and the SDS shank is fully seated and locked before beginning. Avoid forcing the bit or running it dry for extended periods in abrasive aggregate, as this accelerates tip wear.

Technical Specifications

• Cutting Diameter: 5/32 inches
• Overall Length (OAL): 6-5/8 inches
• Shank Type: SDS
• Tip Geometry: Delta
• Weight: 0.08 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-1562-6-D