Eagle Cutting Tool SB-WB.625 Spade Drill Bit 5/8 X 6 Inch

Product Description

The EAGLE CUTTING TOOL SB-WB.625 is a spade drill bit designed for boring clean holes in wood. At 5/8 inch in diameter and 6 inches in overall length, this bit provides extended reach for applications where a standard-length bit falls short. The flat paddle-style cutting head removes material quickly and is suited for rough-in work, structural drilling, and general carpentry tasks. Electricians, plumbers, and HVAC installers commonly use spade bits like this one when routing wire, pipe, or duct through wood framing. The bit weighs 0.1 pounds, keeping it lightweight in the chuck during extended use.

This bit is suited for residential and light commercial construction applications where wood boring through studs, joists, or plates is required. Its 6-inch length gives tradespeople the clearance needed to drill through dimensional lumber without an extension. Typical install scenarios include rough-in electrical runs, plumbing stub-outs, and low-voltage cable routing through wood-framed walls and floors.

Key Features

• 5/8 inch cutting diameter for standard rough-in hole sizing
• 6-inch overall length for extended reach through framing members
• Spade-style flat blade removes wood material quickly
• Lightweight at 0.1 pounds for reduced fatigue during repetitive drilling
• Suited for rough-in trade work in wood framing applications

Compatibility

Designed as an OEM-style replacement or direct-use spade drill bit compatible with standard 3-jaw drill chucks accepting hex or round-shank spade bit configurations used in wood boring applications.

Installation Notes

This bit is installed by electricians, plumbers, HVAC technicians, and carpenters using a standard corded or cordless drill driver. Ensure the bit shank is fully seated and secured in the chuck before drilling. Always wear eye protection when operating drill bits, and confirm there are no hidden utilities in the work area before boring through framing. Follow applicable codes such as NEC or IFGC for minimum edge distances when drilling through structural members.

Technical Specifications

• Cutting Diameter: 5/8 inches
• Overall Length: 6 inches
• Weight: 0.1 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SB-WB.625