Eagle Cutting Tool CDW-60000-1-1/4-7 Wet Core Drill 6 in

Product Description

The EAGLE CUTTING TOOL CDW-60000-1-1/4-7 is a 6-inch wet core drill bit designed for cutting clean, precise holes through masonry, concrete, block, and similar hard materials. Wet core drilling relies on a continuous water feed to cool the bit and suppress dust, extending cutting life and keeping work sites compliant with silica dust regulations. At 12.2 pounds, this is a substantial tool suited for demanding trade applications. Licensed contractors and experienced tradespeople working in plumbing rough-in, HVAC penetrations, and electrical conduit installations are the primary users of this bit.

This wet core drill bit is appropriate for residential and commercial applications where large-diameter penetrations are required through concrete or masonry walls, floors, or slabs. Typical use cases include pipe sleeve installations, conduit chases, and duct penetrations where a clean 6-inch bore is required without fracturing the surrounding substrate. The bit is well-suited for work performed with standard core drill rigs that accept compatible arbor configurations.

Key Features

• 6-inch cutting diameter for large-bore penetrations in concrete and masonry
• Wet-cutting design requires water feed to cool the bit and control silica dust
• Robust construction at 12.2 pounds, built for sustained production drilling
• Designed for use on core drill rigs with appropriate arbor mounting

Compatibility

Designed as a wet core drill bit for use with core drill rigs accepting a compatible arbor size. Verify arbor thread and drive specifications against your drill rig before mounting.

Installation Notes

Installation and operation of wet core drill bits should be performed by qualified tradespeople familiar with core drilling procedures and applicable safety codes. Always ensure the drill rig is properly secured and the water supply is connected before beginning a cut. Verify that no embedded conduit, rebar, or utilities are present in the cutting path prior to drilling. Follow OSHA silica dust control requirements, which for wet drilling mandate maintaining adequate water flow throughout the operation.

Technical Specifications

• Cutting Diameter: 6 inches
• Drilling Method: Wet
• Weight: 12.2 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: CDW-60000-1-1/4-7