Eagle Cutting Tool 1080D-044-D Self-feed Drill Bit 11/16 in

Product Description

The EAGLE CUTTING TOOL 1080D-044-D is a self-feed drill bit designed for fast, aggressive boring in wood framing and rough carpentry applications. The self-feed tip pulls the bit through the material without requiring constant forward pressure, increasing throughput on repetitive drilling tasks. At 11/16 inch in cutting diameter with a 1/2 inch shank, this bit is sized for standard 1/2 inch chuck drills and right-angle drills commonly used by electricians, plumbers, and HVAC installers running pipe, conduit, or duct penetrations through structural members.

This bit is well suited for residential and light commercial rough-in work where tradespeople need to bore clean, consistent holes through lumber, engineered wood, and similar materials. Electricians pulling wire, plumbers running supply or drain lines, and HVAC techs routing flex duct or refrigerant line sets through framed walls and floor joists will find this a standard workhorse tool. It is manufactured in the USA, which is noted for users with domestic sourcing requirements on job sites or contracts.

Key Features

• Self-feed tip design pulls the bit through material, reducing operator fatigue on high-volume drilling
• 11/16 inch cutting diameter suits standard pipe, conduit, and wire penetration sizing
• 1/2 inch shank fits standard and right-angle 1/2 inch chuck drills
• Manufactured in the USA
• Minimum order quantity of 1, available for single-unit purchase

Compatibility

Designed for use with standard 1/2 inch chuck corded and cordless drills and right-angle drills. Suitable for boring through dimensional lumber, engineered wood, and similar framing materials in residential and light commercial rough-in applications.

Installation Notes

Insert the 1/2 inch shank fully into the drill chuck and tighten securely before use. Always wear appropriate eye protection when drilling overhead or into materials that may splinter. Follow applicable OSHA and job-site safety requirements for power tool operation. Inspect the bit tip for wear or damage before each use and replace if the self-feed screw or cutting edges show signs of deformation.

Technical Specifications

• Cutting Diameter: 11/16 inches
• Shank Size: 1/2 inches
• Bit Type: Self-Feed
• Weight: 0.69 pounds
• Country of Origin: USA

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: 1080D-044-D