Dynabrade 59029 Palm Air Random Orbital Sander 6 Inch

Product Description

The DYNABRADE 59029 is a 6-inch palm-style air-powered random orbital sander designed for surface finishing, sanding, and preparation work in professional shop and field environments. Powered by compressed air at 90 psig through a 1/4 NPT inlet, the tool runs at 12,000 OPM with a 3/16-inch (5 mm) orbit diameter, delivering consistent swirl-free material removal. Rated at 0.25 HP and requiring 14 CFM airflow, it is sized for use with standard shop compressor setups. The tool includes a premium urethane weight-mated 6-inch round sanding backing pad and features an integrated vacuum port for dust extraction during operation.

This sander is suited for automotive body finishing, woodworking, composite surface prep, and general industrial sanding applications where a random orbital pattern is required to minimize surface scratching. The 6-inch round pad format is a common standard in both production and detail finishing work. The palm grip form factor makes it appropriate for overhead, vertical, and flat surface applications. A minimum 1/4-inch hose is required to maintain adequate airflow to the tool. Licensed trades and shop technicians performing production finishing or surface restoration work are the primary installers and operators of this tool.

Key Features

• 6-inch round random orbital pad with 3/16-inch (5 mm) orbit diameter for swirl-free finishing
• 12,000 OPM operating speed for efficient material removal and surface blending
• Operates at 90 psig with 1/4 NPT air inlet; requires 14 CFM airflow
• Includes premium urethane weight-mated sanding backing pad
• Integrated vacuum port supports dust extraction during use
• Compact palm grip design at 1.5 pounds for reduced operator fatigue

Compatibility

Designed for use with standard 6-inch round hook-and-loop sanding discs. Requires a compressed air supply capable of delivering 14 CFM at 90 psig and a minimum 1/4-inch air supply hose.

Installation Notes

Connection to the air supply should be made using a properly rated 1/4-inch or larger air line and fittings rated for the operating pressure. Depressurize and disconnect the air supply before changing the sanding pad or performing any service on the tool. Ensure the compressor output meets the 14 CFM requirement to maintain rated tool performance. Dust extraction is recommended; connect the vacuum port to an appropriate collection system before operation in enclosed spaces.