Dynabrade 59014 6 Inch Palm Air Random Orbital Sander

Product Description

The DYNABRADE 59014 is a palm-style air-powered random orbital sander built for professional finishing applications. It accepts a 6-inch round sanding backing pad and operates at up to 12,000 orbits per minute (OPM), delivering consistent stock removal and surface finishing performance. The tool runs on a 0.25 horsepower air motor, requires 90 psi inlet pressure, and consumes 14 CFM of compressed air. A 1/4 inch NPT inlet fitting connects to the shop air supply, and the minimum recommended hose size is 0.25 inches. The unit weighs 1.5 pounds, keeping operator fatigue low during extended use.

This sander is suited for body shop work, woodworking, composite fabrication, and general surface preparation tasks where a fine, swirl-minimizing finish is required. The random orbital action reduces visible scratch patterns compared to straight-line or rotary sanders. The integrated vacuum port makes it compatible with dust extraction systems, helping maintain a cleaner work area and reducing airborne particulate exposure. It is designed for use by automotive refinish technicians, industrial painters, and woodworking professionals who require repeatable finish quality.

Key Features

• 6-inch round pad with 3/8-inch (10 mm) orbit diameter for swirl-free surface finishing
• 12,000 OPM operating speed for efficient material removal and blending
• 0.25 HP air motor powered at 90 psi with a 14 CFM air consumption rate
• 1/4 inch NPT air inlet with a minimum 0.25-inch hose size requirement
• Includes premium urethane weight-mated sanding pad for consistent pad contact
• Vacuum-ready design supports connection to dust extraction systems
• Lightweight at 1.5 pounds for reduced operator fatigue during extended finishing work

Compatibility

Designed for use with standard 6-inch round sanding discs and compatible vacuum-ready dust extraction systems. Accepts 1/4 inch NPT air line fittings standard in most shop air supply setups.

Installation Notes

Installation and operation should be performed by qualified personnel familiar with pneumatic tool safety. Before connecting to the air supply, verify that the compressor outlet pressure is regulated to 90 psi and that the supply hose meets the minimum 0.25-inch inside diameter requirement. Depressurize and disconnect the air line before changing sanding pads or performing any maintenance. Always use appropriate respiratory and eye protection when sanding, and connect to a dust extraction system when available to control airborne particulate.