Dura Plastic PVC80ADSMIP2 Pvc Sch 80 Male Adapter 2 in

Product Description

The DURA PLASTIC PVC80ADSMIP2 is a Schedule 80 PVC male adapter fitting designed to transition a socket (slip) connection to a male pipe thread (MPT) connection in pressure-rated piping systems. At 2 inches, this adapter accepts a solvent-welded pipe on the socket end and threads directly into a female-threaded fitting or valve on the MPT end. Schedule 80 PVC wall thickness provides greater pressure ratings and impact resistance compared to Schedule 40, making this fitting suitable for demanding industrial, commercial, and mechanical applications. Plumbers and pipefitters install this fitting where a cemented PVC run must terminate into a threaded connection point.

This adapter is used in cold and hot water distribution, irrigation systems, chemical processing lines, and pool or spa plumbing where Schedule 80 PVC is specified. The 2-inch size is common in commercial mechanical rooms, pump discharge headers, and filter manifolds. It is appropriate for both above-ground and buried installations where the system design calls for Schedule 80 rated components throughout.

Key Features

• Schedule 80 PVC construction for higher pressure rating versus Schedule 40
• Socket (slip) inlet accepts solvent cement weld for a permanent, leak-free joint
• Male pipe thread (MPT) outlet threads into any standard female NPT fitting or valve
• 2-inch nominal size suits pump, filter, and manifold connections
• PVC material offers corrosion resistance suitable for water, irrigation, and many chemical services

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 80 PVC piping systems using 2-inch nominal pipe size with socket and female NPT threaded components.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters following applicable IPC and local plumbing code requirements. Depressurize and drain the system fully before cutting into any existing line. Use appropriate PVC Schedule 80 solvent cement and primer on the socket end per the cement manufacturer's instructions. Hand-tighten the MPT end into the female-threaded fitting first, then apply thread sealant tape or compound before final tightening to avoid over-torquing the threaded joint.

Technical Specifications

• Material: PVC
• Schedule: Schedule 80
• Nominal Size: 2 inches
• Inlet Connection: Socket (Slip)
• Outlet Connection: Male Pipe Thread (MPT)

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: PVC80ADSMIP2