Dura Plastic PVC8090LSFIP112 Sch 80 90 Deg Elbow 1-1/2 in

Product Description

The DURA PLASTIC PVC8090LSFIP112 is a Schedule 80 PVC 90-degree elbow fitting sized at 1-1/2 inches with a slip socket on one end and a female iron pipe thread (FIPT) on the other. Schedule 80 PVC wall thickness provides higher pressure ratings and greater impact resistance compared to Schedule 40, making this fitting suitable for demanding pressure piping applications. The slip-by-FIPT configuration allows the fitting to solvent-weld directly to PVC pipe on one side and thread onto a male-threaded component on the other. Plumbers, pipefitters, and irrigation contractors install this type of fitting where a 90-degree directional change is needed within a PVC pressure system.

This elbow is used in residential and light commercial plumbing, irrigation, pool and spa circulation, and industrial pressure piping where PVC is an approved material. The slip inlet accepts standard 1-1/2 inch PVC pipe for solvent-cement joining, while the FIPT outlet connects to any standard male NPT-threaded pipe, valve, pump port, or equipment fitting of the same size. It is well suited for pump discharge connections, filter manifolds, and service equipment hookups where a threaded transition is required at a 90-degree turn.

Key Features

• Schedule 80 PVC construction for higher pressure ratings versus Schedule 40
• 90-degree elbow geometry for right-angle directional changes in piping runs
• Slip inlet accepts 1-1/2 inch PVC pipe for standard solvent-cement joining
• FIPT outlet threads onto any standard 1-1/2 inch male NPT fitting, valve, or equipment port
• PVC material resists corrosion, scale, and common chemicals found in plumbing and pool systems

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1-1/2 inch Schedule 80 PVC pressure piping systems using standard NPT thread connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable local plumbing codes and ASTM standards for PVC pressure piping. Shut off system pressure and drain the line before cutting into an existing piping run. The slip end requires approved PVC primer and solvent cement applied per the cement manufacturer instructions. The FIPT end should be assembled with PTFE thread tape or an approved pipe thread sealant and tightened to hand-tight plus no more than one to two turns to avoid cracking the PVC threads.

Technical Specifications

• Material: PVC
• Schedule: Schedule 80
• Size: 1-1/2 inches
• End Connections: Slip x FIPT
• Angle: 90 degrees
• Thread Standard: NPT

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: PVC8090LSFIP112