Dura Plastic PVC40T6 Pvc Sch 40 Tee 6 Inch Slip

Product Description

The DURA PLASTIC PVC40T6 is a 6-inch Schedule 40 PVC tee fitting configured with three slip connections — one inlet and two outlets — allowing a branch line to split off a main run at a 90-degree angle. Built from rigid PVC compound, this fitting meets the dimensional and pressure standards of Schedule 40 pressure piping systems. It is a staple fitting for plumbers, irrigation contractors, and pool and spa technicians working with large-diameter PVC distribution lines. Solvent-weld slip sockets on all three ports provide a permanent, leak-free joint when properly primed and cemented.

This tee is used in residential and commercial pressure piping applications where a 6-inch main line requires a branch connection. Common install scenarios include irrigation mainlines, pool and spa plumbing return systems, industrial process piping, and municipal water distribution laterals. The slip configuration requires solvent cement and is suited for fixed installations where a union or threaded disconnect is not needed.

Key Features

• Schedule 40 wall thickness rated for pressure service in cold water applications
• Slip x Slip x Slip socket configuration on all three ports for solvent-weld assembly
• 6-inch nominal pipe size for large-diameter distribution runs
• PVC material resists corrosion, scale buildup, and chemical degradation in standard water service
• Compatible with standard PVC primer and solvent cement per ASTM D2564

Compatibility

Designed as an OEM-style replacement and standard-use fitting for Schedule 40 PVC pressure piping systems using 6-inch nominal pipe.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation technician in accordance with local plumbing codes and IPC guidelines. Depressurize and drain the line completely before cutting into any existing piping. Clean and deburr all pipe ends, apply approved PVC primer to both the pipe and socket, then apply solvent cement and seat the pipe with a quarter-turn before holding for the manufacturer-recommended cure time. Do not pressure-test the joint until full cure is complete.

Technical Specifications

• Pipe Size: 6 inches
• Connection Type: Slip x Slip x Slip
• Schedule: Schedule 40
• Material: PVC
• Application: Pressure Fittings

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: PVC40T6