Dura Plastic PVC40T112 Schedule 40 Tee 1-1/2 in Slip

Product Description

The DURA PLASTIC PVC40T112 is a Schedule 40 PVC tee fitting designed for three-way branch connections in pressurized and drain piping systems. All three ports measure 1-1/2 inches and use slip-socket connections, accepting standard 1-1/2-inch PVC pipe ends bonded with solvent cement. Schedule 40 wall thickness provides the pressure rating and structural integrity required for residential and light commercial water distribution, irrigation, and drainage applications. Plumbers and pipefitters install this fitting where a straight run requires a perpendicular branch outlet of equal diameter.

This fitting is suited for cold and ambient-temperature water supply lines, irrigation laterals, pool and spa plumbing, and drain-waste-vent branch connections where a same-size tee is required. The equal-outlet configuration eliminates the need for reducing bushings when all three connected pipe runs share the same 1-1/2-inch nominal size. It is commonly used in residential plumbing rough-in work, above-ground irrigation manifolds, and recirculating pool equipment piping.

Key Features

• Equal 1-1/2-inch slip sockets on all three ports for consistent flow geometry
• Schedule 40 PVC construction meets pressure and wall-thickness requirements for standard water service
• Slip-socket design bonds permanently with standard PVC solvent cement for a leak-free joint
• Suitable for pool, spa, irrigation, and potable water distribution piping
• Lightweight PVC material resists corrosion and scale buildup in wet service environments

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with 1-1/2-inch nominal Schedule 40 PVC pipe systems in plumbing, irrigation, and pool applications.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters following IPC and local plumbing code requirements. Shut off and depressurize the supply line before cutting into any existing piping. Clean and dry all mating pipe ends, apply PVC primer, then apply solvent cement to both the pipe end and the fitting socket before assembling with a quarter-turn twist. Allow full cure time per the cement manufacturer instructions before restoring flow or pressure testing the system.

Technical Specifications

• Material: PVC
• Schedule: Schedule 40
• Connection Type: Slip x Slip x Slip
• Port Size: 1-1/2 inches (all three ports)
• Fitting Configuration: Equal Tee

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: PVC40T112