Dura Plastic L16945YP Pvc 45 Degree Elbow 1 Inch Sch 40

Product Description

The DURA PLASTIC L16945YP is a 1-inch nominal PVC 45-degree elbow fitting manufactured to Schedule 40 (SCH 40/STD) standards. It features a spigot end style, making it suitable for solvent-cement connections in pressure-rated PVC piping systems. This fitting is domestically produced and sized at 1-inch nominal, providing a reliable directional change in low-pressure plumbing, irrigation, and pool or spa piping runs. Licensed plumbers, irrigation technicians, and pool service professionals routinely specify SCH 40 PVC fittings for their combination of chemical resistance, pressure rating, and cost-effectiveness in residential and light commercial applications.

This elbow is intended for use in PVC pressure piping systems where a 45-degree change of direction is required. Typical installations include residential and commercial water supply lines, pool and spa plumbing, and irrigation distribution systems. The spigot end style is designed to insert into a compatible socket-end fitting or valve body, secured with PVC solvent cement. The SCH 40 wall thickness meets standard dimensional requirements for 1-inch nominal piping, ensuring consistent fit with mating components across the same schedule and nominal size.

Key Features

• 1-inch nominal size in Schedule 40 (SCH 40/STD) wall thickness
• 45-degree elbow geometry for directional changes in piping runs
• Spigot end style for solvent-cement insertion into socket fittings
• PVC construction provides chemical resistance and lightweight handling
• Domestically manufactured to standard dimensional tolerances

Compatibility

Designed as an OEM-style replacement and standard fitting for 1-inch nominal Schedule 40 PVC piping systems using solvent-cement joining methods.

Installation Notes

Installation is performed by licensed plumbers or qualified irrigation and pool technicians following applicable IPC and local plumbing code requirements. Shut off and depressurize the water supply completely before cutting into any existing line. Clean and dry all mating surfaces, apply PVC primer where required by code, then apply solvent cement to both the spigot and socket surfaces before joining. Allow adequate cure time per the cement manufacturer instructions before restoring system pressure.

Technical Specifications

• Nominal Size: 1 inch
• End Style: Spigot
• Schedule: SCH 40 / STD
• Material: PVC
• Angle: 45 degrees
• Origin: Domestic

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: L16945YP