Dura Plastic L07115YP Pvc Street Elbow 2 in Socket Mnpt Sch 40

Product Description

The DURA PLASTIC L07115YP is a 2-inch nominal PVC street elbow rated for Schedule 40 standard wall construction. It features a Socket x Male NPT (MNPT) end style, allowing one end to accept a solvent-cemented pipe or fitting while the other threads directly into a female-threaded fitting or valve. This configuration reduces the need for an additional coupling in tight installations. The fitting is manufactured domestically from PVC, making it suitable for cold and ambient-temperature water distribution, irrigation, and general plumbing drain and supply systems. Plumbers and pipefitters install this type of fitting when a directional change is needed close to a threaded connection point.

This street elbow is used in residential and light commercial plumbing, pool and spa plumbing, and irrigation systems where a 90-degree direction change is required. The socket end accepts standard 2-inch PVC pipe for solvent cement joining, while the MNPT end threads into female-threaded ports on valves, manifolds, pumps, or equipment. Its Schedule 40 wall thickness meets common pressure ratings for cold-water service in typical above-ground and in-wall installations.

Key Features

• 2-inch nominal size with Socket x MNPT end configuration for solvent-cement-to-threaded transitions
• Schedule 40 standard wall thickness for cold-water pressure service
• PVC construction offers corrosion resistance and compatibility with common solvent cements
• Domestic manufacture
• Street elbow design reduces fitting count in tight-clearance directional changes

Compatibility

Designed as an OEM-style replacement or new-installation fitting for Schedule 40 PVC piping systems using 2-inch nominal pipe with socket and female-threaded connections.

Installation Notes

This fitting is installed by licensed plumbers or qualified pipefitters following applicable IPC and local plumbing code requirements. Shut off the water supply and depressurize the line before making any connections. The socket end requires proper PVC primer and solvent cement applied per the cement manufacturer's instructions and ASTM D2564 guidelines. The MNPT end should be threaded with PTFE tape or pipe thread sealant and hand-tightened before wrench-snugging — do not overtighten, as PVC threads can crack under excessive torque.

Technical Specifications

• Nominal Size: 2 inches
• End Style: Socket x MNPT
• Schedule: SCH 40 / STD
• Material: PVC
• Origin: Domestic

Standard Information

• Brand: DURA PLASTIC
• Manufacturer Part Number: L07115YP