Dupont TY125SWH2X0025VP Tyvek Coveralls 2XL 25-pack

Product Description

The DUPONT TY125SWH2X0025VP is a disposable protective coverall made from Tyvek 400, a flash-spun high-density polyethylene nonwoven fabric manufactured exclusively by DuPont. Weighing 1.2 oz per square yard, the material delivers a balance of particle protection, durability, and breathability suited to limited-use applications. The coverall features a front zipper closure with stormflap, elastic cuffs, elastic ankles, and serged seams. This SKU ships as a case of 25 units in size 2X-Large with a 30.5-inch inseam. It is intended for single-use deployment by maintenance workers, abatement crews, painters, and general-trade laborers requiring lightweight particle barrier protection.

This coverall is designed for use in non-cleanroom environments where protection against particulates, light chemical splash, and contamination is required. Typical applications include lead and asbestos abatement and remediation, spray painting operations, general maintenance and facility operations, and general clean-up tasks. The elastic ankle and cuff design helps seal the garment at entry points, reducing particulate ingress during active work. The serged seam construction provides reliable stitching integrity across the full garment. This is a non-hazardous protection classification garment and is not rated for use with hazardous chemicals or CBRN environments.

Key Features

• Tyvek 400 flash-spun HDPE nonwoven fabric at 1.2 oz material weight
• Front zipper closure with stormflap overlay
• Elastic cuffs and elastic ankles for a secured fit at extremities
• Serged seam construction for garment integrity
• ISO Non-Cleanroom classification — suitable for general industrial environments
• Rated for lead and asbestos abatement, spray painting, and general maintenance applications

Compatibility

Designed for non-cleanroom industrial environments where particle protection is required, including lead and asbestos abatement, spray painting, general maintenance operations, and general clean-up tasks as specified by the manufacturer.

Installation Notes

Coveralls should be donned before entering a contaminated work area and doffed carefully upon exit to avoid self-contamination, following site-specific safety and decontamination protocols. Inspect each garment for tears or defects before use and discard any damaged units. Disposal must comply with applicable local, state, and federal regulations for the waste stream generated by the specific application, particularly for asbestos or lead abatement work governed by OSHA standards. These are single-use garments and must not be reused or laundered.